產品詳細資料
•變壓器過載：當變壓器過載元件運行時，變壓器過載LED指示燈亮起。•負載限制降低：當自適應諧波系數校正功能檢測到足夠的諧波含量以降低變壓器的額定負載時，負載限制降低LED指示燈亮起。如果S2 SYSTEM SETUP（S2系統設置），指示燈亮?? 諧波? 諧波降額估計為“啟用”，諧波降額函數低于0.96。•設定點組1（4）：這些指示器反映當前激活的設定點組。編輯相應的設定點組時，指示燈閃爍。4.1.4.3輸出狀態指示器•跳閘：當任何選擇為跳閘類型的輸出繼電器運行時，跳閘LED亮起。•報警：當選擇為報警類型的任何輸出繼電器運行時，報警LED亮起。•拾取：當任何元件拾取時，拾取LED亮起。此指示燈亮起時，前面板顯示器會依次顯示已拾取的每個元素的信息。•相位A（C）：當相位A（C）涉及由任何已拾取、操作或現在處于鎖存狀態等待重置的元件檢測到的條件時，相位A（d）LED亮起。•接地：當接地涉及任何已拾取、操作或現在處于鎖存狀態等待復位的元件檢測到的情況時，接地指示燈亮起。
• TRANSFORMER OVERLOAD: The Transformer Overload LED indicator is on when the Transformer Overload element has operated. • LOAD-LIMIT REDUCED: The Load-Limit Reduced LED indicator is on when the adaptive harmonic factor correction feature is detecting enough harmonic content to reduce the load rating of the transformer. The indicator is on if S2 SYSTEM SETUP ?? HARMONICS ? HARMONIC DERATING ESTIMATION is “Enabled” and the harmonic derating function is below 0.96. • SETPOINT GROUP 1(4): These indicators reflect the currently active setpoint group. The indicators flash when the corresponding setpoint group is being edited. 4.1.4.3 Output Status Indicators • TRIP: The Trip LED is on when any output relay selected to be of the Trip type has operated. • ALARM: The Alarm LED is on when any output relay selected to be of the Alarm type has operated. • PICKUP: The Pickup LED is on when any element has picked up. With this indicator on, the front panel display is sequentially displaying information about each element that has picked up. • PHASE A (C): The Phase A(C) LEDs are on when phase A(C) is involved in the condition detected by any element that has picked up, operated, or is now in a latched state waiting to be reset. • Ground: The Ground LED is on when ground is involved in the condition detected by any element that has picked up, operated, or is now in a latched state waiting to be reset.
主營產品簡介
專注于DCS、PLC、機器人控制系統、大型伺服四大系統領域。

主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。

優勢：供應進口原裝正品，專業停產配件，

發貨快，貨期精準，

主營品牌包括 ABB貝利、GE/FUANC、FOXBORO、英維思TRICONEX 、本特利BENTLY、A-B羅克韋爾、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韋爾HONEYWELL 、力士樂REXROTH、KUKA、NI、DEIF、橫河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只賣庫存產品;出完需訂貨!價格以客服說明為準!!訂貨貨期以客服說明為準，有任何疑問請聯繁客服! Limited stock, Contact US!

●使用前:

在操作和維護，安裝設備之前，請閱讀并嚴格遵守安全相關的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必須從事安裝，組裝或維護設備等相關工控電氣機械以及其他相關技術的人員。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.應用范圍:

應用于品牌本系列工業以及生產生活自動化設備產品。

Used in the brand of this series of industriaand production automation eauipment products

適用于場景:系統集成，非標定制，產線升級改造，原設備電氣替換等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人員:

應該由本品牌專業培訓操作員來安裝、操作和維修設備。專業人員具有技術能力強，熟悉安全信息和安全實施:

熟悉設備的安裝加工、操作和維護:熟悉處理所有的潛在危險情況。

Equipment should be installed,operated and maintained by trained operators from the brand

●危險情況

警告

.請注意使用人員的人身安全。

●除了產品特性以及功能，還需了解產品的使用壽命環境。

●充分學習產品使用手冊，否則非專業人員可能會造成人身危險。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服務行業

適用水泥，木業，石業，橡膠，石油，化工，發電，環保，水處理，制冷，交通，鋼鐵，食品，飲料，船舶，制冷等行業

Applicable to cementwood,stone,rubber,petroleumchemical, power generation